Key Features
- Standalone applications up to 8 lines
- Integrated Assist Call with acknowledge meeting BS8300
- Lockable handset cover
- Full duplex operation
- Fully compliant to BS 5839-9:2021
Overview
The Crisis EVC Standalone Master Station is perfect for smaller installations with up to 8 lines. It is easy-to-install, reliable and cost-effective.
The Crisis EVC Standalone Master Station is a self-contained enclosure that houses a master handset, one to four dual line cards, power supply and battery charger. It is made from powder coated zintec with a perspex door covering the handset and can be flush or surface mounted. 20mm cable knock-outs are provided for all necessary cables as well as space for the backup 12V VRSLA battery.
Ideal Solution For Relatively Small Applications
The Crisis EVC Standalone Master Station is a straightforward, effortless solution requiring no prior setup knowledge. It is very easy to install – each outstation is powered by a single radial circuit – perfect for standalone applications requiring up to 8 lines.
Compatible Outstations
All Crisis EVC Outstations are compatible with Crisis EVC Standalone Master Station, this includes: Crisis Type A Outstations, Crisis Type B Outstations, Crisis Type C Outstations and jack points for use in Far and Middle East applications.
Lines auto identify by flashing red for EVCS calls, blue for assist calls or flashing green for connected calls as detailed in BS 5839-9:2021. An accessible toilet and Type B refuge point can share the same line, as the front panel RGB indicators identify which is calling, with refuge overriding emergency assist calls as required by BS 5839-9:2021.
Emergency Assistance Alarms
Crisis emergency voice communication systems combine disabled refuge, fire telephones and emergency assistance alarm systems into one fully-integrated, robust network. This not only delivers significant cost savings but also provides a system that is easy to install, configure and operate. Crisis EVC also has fault-monitored wiring, is fully line powered, and provides battery backup via the master station.
Turntable
Approvals
Tech Specs
| AC input | 230VAC +/- 10% 50/60Hz |
| Internal Supply | 5V, 16V, 27V DC |
| Supply | Monitored Open, Short, Fuses, High Impedance |
| Protection | Deep discharge, Short, Thermal |
| Battery Type | 1 x 12V 7AH VRSLA, Thermal |
| Mains Fuse | 240V 1A HRC |
| Battery Fuse | 750mA PTC |
| Charge Current | 400mA |
| Lines | 2-8 in 2 line blocks |
| Remote Enable | Short to use |
| End of Line | 10KΩ |
| Outstation Cable Type | Standard* / Enhanced |
| Outstation Cable Cores | 1 x 2 core radial 1mm or 1.5mm |
| Outstation Cable Distance | 500m from master station 1.5mm |
| Outputs | 2, Fault & In usestation 1.5mm |
| Fault Relay | 1x Volt free NC, Com 30VDC 1Am |
| In Use Relay | 1x Volt free NO, Com 30VDC 1A |
| Buttons | 8 Zone keys |
| Zone LEDs (x8) | RGB Status LEDs |
| Fault LEDs | 3, PSU, System, General |
| Supply LEDs | 2, AC ,DC present |
| EMC | EN 55035:2017+A11:2020EN 55032:2015+A1:2020 |
| LVD | EN IEC62368-1:2020+A11:2020 |
| Product Family | BS 5839-9: 2021BS 9999:2017, BS 8300-2:2018 |
| Dimensions (W x H x D) | 350 x 300 x 95mm |
| Weight | 4.2kg |
*Refer to BS 5839-9: 2021 for exceptions
Downloads
- Crisis EVC Standalone Master Station Datasheet
- Crisis EVC Standalone Master Station Installation Guide
- Crisis EVC Standalone Master Station User Guide
- Crisis EVC Standalone Master Station Quick Start Guide
Buy
Contact us for trade discount and credit opportunities.
