Eurofyre Knowledge Base

E2S IS-A105N Intrinsically Safe Sounder

Knowledge Base

Key Features

E2S IS-A105N Intrinsically Safe Sounder
E2S IS-A105N Intrinsically Safe Sounder
E2S IS-A105N Intrinsically Safe Sounder
  • Intrinsically safe alarm sounder for hazardous areas
  • High output audible warning up to 105 dB(A)
  • 49 selectable alarm tones with multi-stage capability
  • IP66 rated enclosure for harsh environments
  • Compatible with Zener barriers or galvanic isolators

Overview

The E2S IS-A105N Intrinsically Safe Sounder is a high-output audible alarm designed for hazardous environments where explosive gases or vapours may be present. It provides a clear audible warning signal to support fire detection, safety and process control systems.

The sounder produces up to 105 dB(A) output at 1 metre and offers 49 selectable alarm tones. The output tone is selected using internal switches and can be configured for single-stage or multi-stage alarm signalling. Second- and third-stage alarm tones can be triggered by connecting dedicated control terminals, allowing the sounder to support different warning signals during an incident. 

The unit operates from a 24 V DC intrinsically safe supply via an approved Zener barrier or galvanic isolator. Power terminals are duplicated to allow multiple sounders to be connected in parallel, or to support end-of-line monitoring. 

The enclosure is constructed from flame retardant ABS and provides IP66 ingress protection. This makes the sounder suitable for demanding industrial environments where dust, moisture or harsh weather conditions may be present.

Turntable

E2S IS-A105N Intrinsically Safe Sounder
E2S IS-A105N Intrinsically Safe Sounder
E2S IS-A105N Intrinsically Safe Sounder

Approvals

FM

Tech Specs

Nominal output105 dB(A) @ 1 m +/- 3 dB – Tone 2* [96 dB(A) @ 10 ft/3 m]
No. of tones49 (UKOOA/PFEER compliant)
No. of stages3
Volume controlMax. 105 dB(A); Min. 96 dB(A) – Tone 2
Effective range60 m/197 ft @ 1 KHz
Voltage16-28 V DC via Zener barrier or galvanic isolator
Current25 mA typical when powered from 24 V supply via 28 V 300 Ohm Zener barrier
Ingress protectionIP66
RatingContinuous
Enclosure materialUL94V0 & 5VA FR ABS
Enclosure colourRAL3000 Red, RAL7038 Grey
FixingsStainless Steel
Cable entries2 x M20 entries – stopping plugs included
Terminals0.5 to 2.5 mm²
Operating temp-40 to +60 °C [-40 to +140 °F]
Storage temp-40 to +70 °C [-40 to +158 °F]
Relative humidity90% at 20 °C [68 °F]
MTBF227.40 years / 1,992,031 hours – MIL 217
Weight0.75 kg/1.65 Ibs

Downloads

Datasheet

Manual

Approvals

Wiring Diagram

    Contact Eurofyre