- EN54-25 approved
- 868 – 870 MHz operating frequency
- Powered by lithium metal batteries
- Sufficient cable space
- Available in red or white
The Wi-Fyre Wireless Input/Output Module has been designed to provide a means to trigger an alarm or fault from ancillary input operations and/or to switch remote equipment in the event of an alarm condition. When operating together with a transponder set to mode 5, it can also be used as a reflective input/output device to wirelessly interconnect two or more stand-alone fire alarm panels together.
Wi-Fyre is approved by TUV for safe use and installation in any European Union country and bears the CE mark to show that it complies with all the applicable Directives including the CPR, EMC and the Low Voltage Directive (LVD).
Fire detection and fire alarm systems – components using radio links.
|Operating Frequency||868 – 870 MHz, 14dBm|
|Range||150m open area|
|Power Source||4 x Lithium AA Cell (Saft LS14500)|
2 x Lithium C Cell (Saft LS26500)
|Battery Life||Up to 3 years|
|Input End-of Line||Normal = 22k Ohm, Alarm = 1k Ohm|
|Manual Alarm Relay Contact||1 x Solid-state normally open, 60Vdc, 600mA|
|Automatic Alarm Relay Contact||1 x Solid-state normally open, 60Vdc, 600mA|
|Common Fault Contact||1 x Solid-state normally closed (failsafe), 60V, 500mA|
|Dimensions (Diameter x Height x Depth)||122 x 128 x 50mm|
|Weight (Including Batteries)||460g|
|Applicable Standards||EN54-25, BS 5839 Part 1:2002, ENTSI 300:220|