Key Features

  • Single output module
  • Integrated DIN rail brackets
  • Built-in short circuit isolators
  • Addressability through rotary switches
  • CLIP and Advanced Protocol

Overview

System Sensor Addressable Single Output Modules are designed to combine maximum reliability with top-end functionality.

The System Sensor Addressable Single Output Module optionally supervises the wiring to the load devices and, upon command from the control panel, switches an external power supply to operate these devices.

In normal supervised mode, the device switches out the load supervision and switches in the external power supply through a double pole relay. The external power supply is monitored and raises an unlatched fault condition if the voltage falls below the fixed threshold.

In unsupervised mode, the device provides neither load nor power supply supervision and can be used to switch a single form C set of changeover contacts.

The mechanical design of System Sensor Addressable Single Output Modules allows each module to be mounted in either a common wall box, on a DIN rail (made possible by smart DIN brackets directly built-in the enclosure) or in its dedicated enclosure. Irrespective of the chosen mounting method, the address switch is always visible and accessible for selection.

Each module has built-in short circuit protection for the communications loop and, to increase application flexibility, the isolators can be selected/deselected on an individual module basis.

Rotary switches are used to configure addressability and can be accessed on both sides without having to remove the cover of the surface mounting box. Status LEDs that provide diagnostic information regarding the status of each individual output are also visible from both sides of the unit.

System Sensor Addressable Single Output Modules have been equipped with quick connectors to provide easy installation, testing and maintenance.

Turntable

Please ensure the entire turntable is visible on your screen in order for it to play.

Approvals

Tech Specs

Operating Voltage Range15 to 32VDC
Maximum Standby Current160μA at 24VDC no communications
Relay SpecificationsNormal and unsupervised form C ratings 2A at 30VDC, resistive load
Operating Temperature Range-20°C to +60°C
Humidity5 to 95% Relative Humidity (non-condensing)
IP RatingIP30 (IP44 in M200E–SMB)
Dimensions (H x W x Lmm)22 x 93 x 82mm
Weight118g
Maximum Wire Gauge for Terminals2.5mm2

Downloads

Buy

Eurofyre is an authorised distributor of Honeywell and we support the entire Morley IAS and System Sensor range of products. We offer expert advice and supply all aspects of fire detection systems including excellent before and after-sale support.

Contact us to receive competitive trade discounts or apply online for a credit account.

System Sensor Addressable Single Output Module

System Sensor Addressable Single Output Module

M201EA-B
POA
Contact Us