Search

FyreLine Digital Nylon, SS LHD Cable

Search

Key Features

  • UL 521 approved
  • Cable based sensing allows detection at the point of risk
  • Low installation, maintenance and repair costs
  • Reliable solution for hazardous areas
  • Low material cost

Overview

A Nylon coated cable is the common choice when hazardous hydrocarbons such as fuel oils, diesel, kerosene etc. are present. Nylon cables are coloured black and provide suitable UV protection when used in direct sunlight. Nylon is much tougher than PVC and therefore provides additional mechanical protection. An additional stainless steel braiding over the outside of the cable is included thus providing protection for areas where the cable may be accidentally cut or where it may be subject to mechanical abrasion.

Approvals

The FyreLine digital linear heat detection cables are fully approved by the Underwriters Laboratories (UL) and bears the CE mark to show that they comply with all the applicable Directives including the CPR, EMC and the Low Voltage Directive (LVD).

  • UL 521
    Heat detectors for fire protective signaling systems.

Tech Specs

ConstructionOverall insulated, twisted pair of tri-metallic cores
Insulation1kV tested protective outer coat
ApprovalsCE Marked, UL Listed
Maximum Zone Length 3,000m (10,000ft)
Overall Diameter 4.50mm ± 0.12mm (0.177” ± 0.005”)
Minimum bend radius50mm (2”)
Max Voltage Rating30Vac, 42Vdc
Resistance~100Ω/km (29Ω/kft) per leg
Velocity of Propagation~55%
Capacitance88 – 150 pF/m (26 – 45 pF/ft)
Inductance540 – 1050 nH/m (165 – 320 nH/ft)

Downloads

Buy