- Single or dual channel fire detection
- Uses analogue addressable or conventional detectors (not supplied)
- Multiple configuration options
- Multiple detection strategies
- Highest fan capacity in its class
ICAM IAS is a flexible aspirating smoke detector from Xtralis. The ICAM IAS is well suited for a range of applications. The ICAM IAS provides fast and reliable detection that can be integrated with any existing fire alarm control panel – helping to maintain aesthetics of a property, provide a tamper proof detection solution or simply replace traditional point detectors.
The ICAM IAS combines standard field-serviceable detectors with a stand alone air-sampling solution. ICAM IAS detectors actively draw air from the protected area, through sampling holes in a network of pipe, to its detection chamber. The sampled air is then analysed by conventional or analogue point detectors that are installed within the chamber.
The IAS is available with one inlet pipe (IAS-1) or two inlet pipes (IAS-2) and is compatible with photoelectric technology.
The ICAM IAS is a cost effective and simple to install, and configure aspirating smoke detection solution. On top of this, in applications where an existing fire detection system is already in place, the ICAM IAS systems can be easily integrated with the existing fire alarm control panel.
ICAM IAS systems can be configured for single or dual addressable area detection, redundant detection, multi-criteria detection, coincident or double-knock detection and more.
- IP65 enclosure
- Up to 50m (328 ft) per sampling pipe
- Microprocessor controlled
- Integral display and programmer
- Field serviceable air filter
- Adjustable aspirator speed with airflow monitoring
The ICAM IAS is fully approved by VdS for safe use and installation in any European Union country and bears the CE mark to show that it complies with all the applicable Directives including the CPR, EMC and the Low Voltage Directive (LVD).
- EN54-20:2006 + AC:2008 – Fire detection and fire alarm systems – Control and indicating equipment.
|Detectors||1 or 2 analogue addressable or conventional spot (point) detectors|
A variety of detector technology types (photoelectric, ionization, heat, CO etc.)
Spot (point) detectors with universal screw mounting
|Inlet Pipe Size||Outer Diameter: 25 mm (0.98 in.)|
Inner Diameter: 21 mm (0.83 in.)
Class C (1 hole)
|Sampling Network||Pipe Length: Up to 50 m (328 ft) per inlet|
Pipe length may vary subject to specifications by local codes and standards, please refer to your regional IAS product guide for further detail
|Supply Voltage||24 VDC nominal (18 to 30 VDC)|
Note, that spot (point) detectors are powered from the fire alarm field wiring
|Operating Current||300mA max (fan speed dependent)|
|Relay Outputs||IAS-1: 1 fault relay|
IAS-2: 2 fault relays
|Flow Monitoring and Reporting||High and Low adjustable Fan:|
Control: 10 programmable speeds
Pressure: 250 Pa
|Operating Conditions||Temperature: -10 to 60 °C (14 to 140 °F)|
Humidity: 10 to 95% RH (non-condensing)
External filter optional
|Dimensions (W x H x D)||259 mm x 184 mm x 166 mm (10.2 in. x 7.2 in. x 6.5 in.)|
Eurofyre are an approved supplier of Xtralis (Honeywell) and have been a major technical wholesaler since 2007. We offer expert advice and supply all aspects of VESDA aspirating smoke detection systems including pipework calculations, demonstration/training and excellent after-sale support.
Contact us for trade discount and credit opportunities.
The ICAM IAS range has been discontinued as of the 30th September 2020 and the alternative product, FAAST Flex will be released soon. The official end of life notice can be found in the ‘Downloads’ section. Spare parts for the ICAM IAS are still available. If you have any questions relating to stock availability please contact us below.