Key Features

  • Can be configured into a fully functioning conventional panel
  • 254 Velocity devices per SLC
  • 254 available programmable zones
  • Up to 64 panel peer-2-peer network
  • Positive Alarm Sequence


The Velocity MMP/10 is a powerful and sophisticated analogue addressable fire alarm control panel. Unlike most control panels, this panel has a variety of modular components which allow it to be adapted and expanded to meet a wide variety of applications.

The panel is equipped with a 4.3” touch screen colour display that provides a clear,  uncluttered and intuitive interface which requires little end-user training.

Velocity MMP/10 fire alarm panels can support complex cause and effect programming and have a range of user-controllable functions that make them suitable for most projects, from multi-site commercial developments to industrial applications.

The VDOT-AD2 handheld programming tool can be used to soft-address the connected addressable devices, thus reducing installation time that is commonly associated with hard-addressing and minimising the potential for error.

This panel can operate as part of a networked system of up to 64 panels peer-to-peer or as a standalone panel. Powerful programming options allow configurable control over whether messages from each panel remain local or are transmitted around the network.

All Velocity components are designed to operate as part of a Velocity UL listed system, guaranteeing that the detectors, interfaces, NAC devices and panels are all fully compatible with each other and that full system functionality is supported by all devices.

Panel Modules

Velocity MMP/6 fire alarm panels can be customised with a variety of modular components to make them suitable for almost any application. Modules currently available include:

  • VL-SLC – Signalling Line Circuit Module

    The VL-SLC module provides power for and handles communications with analogue addressable devices.

    Read More
  • VL-ZMA – Zone Monitor Module, Class A

    The VL-ZMA is a three zone module. This module has three class A zone monitors which can be used for conventional detectors that are not available in addressable form.

    Read More
  • VL-ZMB – Zone Monitor Module, Class B

    This is a six zone class B module. It has six class B zone monitors which can be used to monitor conventional devices and/or for special detectors that are not available in an addressable option.

    Read More
  • VL-NCA – Notification Appliance Circuit Module, Class A

    This module provides power for, and handles communications to, non-addressable notification appliances. The VL-NCA has one notification appliance circuit that can be wired in class A configuration.

    Read More
  • VL-NCB – Notification Appliance Circuit Module, Class B

    This module also provides power for, and handles communications to, non-addressable notification appliances but has two notification appliance circuits that can be wired in class B configuration.

    Read More
  • VL-MIM – Multi Input Module, Class B

    The VL-MIM has six class B inputs that are commonly used to monitor and raise alarms from any ancillary equipment such as sprinkler flow switches, aspiration detectors, secondary fire alarm control panels, beam detectors, external power supplies and more.

    Read More
  • VL-MRM – Relay Module, Form C

    The VL-MRM relay module has three form C relays which are typically used to control lift operation, fire pumps or ventilation fans in the event of a fire.

    Read More
  • VL-NWM – Network Module

    The Velocity VL-NWM network module accommodates up to 64 nodes. It is used to monitor, indicate and control the functions of a fire alarm installation and allows signals to be distributed around large sites.

    Read More
  • VL-MBM – Modbus Module

    The VL-MBM modbus module is used to link the Velocity fire alarm panel to a building management system (BMS) to control ventilation, lighting, power systems, fire systems and security systems in the event of a fire.

    Read More
  • VL-232 – RS232 (Printer) Module

    The VL-232 module gives a Velocity panel the ability to interface to RS232 serial equipment and devices. This is most commonly used to connect the Velocity MMP to an RS232 panel printer or a desktop printer for real time event log printing.

    Read More
  • VL-LAN – TCP/IP Module

    The VL-LAN TCP/IP module enables the fire alarm panel to be remotely monitored via the Zeta Smart Remote mobile application.

    Read More

Additional Features

  • Automatic drift compensation
  • Alarm verification
  • Mains trouble output delay programmable from 0 to 240 minutes
  • NAC special application 24V mode
  • 240W power supply
  • Modular construction allows a panel to be specified using just the required modules
  • Up to 4 SLC modules
  • 4.3” colour touch screen display
  • Capacity for up to 6 intelligent modules
  • Full system redundancy
  • Connection to TCP/IP module
  • Extensive day/night mode programming
  • Full cause & effect programming via front panel or the Velocity Connect PC Software
  • 8032 events log


All components in the Velocity range are UL certified and comply with the requirements of Underwriters Laboratories (UL) 864 Control Units and Accessories for Fire Alarm Systems 10th Edition.

Tech Specs

Max Module Capacity10
Zones254 Zones
Maximum Event Log8032 Events
Software ProgrammingTouchscreen LCD or Velocity Connect PC Software
Display4.3” Resistive Touch Screen. 480 x 272 Pixel Resolution
LED Indicators1 Red (1 x Alarm)
1 Green (Power)
10 Yellow (1 x Supervisory, 1 x Trouble, 1 x Alarm Silenced, 1 x Controls Active, 1 x NAC Active, 1 x General Disablement, 1 x General Test, 1 x NAC Trouble/Disablement, 1 x NAC Delay, 1 x CPU Trouble).
Button ControlsSilence Alarm, Ack, Scroll, Reset, Drill
Alarm Output(C, NO, NC)
Contact Rating: 125V AC @ 0.5A / 30V DC @ 1A
Trouble OutputNormally Energised (C, NO, NC)
Contact Rating: 125VAC @ 0.5A / 30VDC @ 1A
Maximum Network Size64 Nodes
Maximum Distance Between Nodes1KM
Mains AC Supply Voltage240/120 V AC
Mains AC Supply Frequency50/60 Hz
Power Supply DC Rating30V DC 10A
Battery Voltage24V DC
Battery Charge Current1.1A (Max)
Battery Capacity (Supervised)2 x 12Ah, 12V DC Sealed Lead Acid (Max)
NAC Voltage29V DC Nominal (19V – 29V)
NAC Maximum Current1A (VL-NCA) / 500mA per Circuit (VL-NCB)
NAC Maximum Line Resistance1.8Ω Total (VL-NCA) / 3.6Ω Total (VL-NCB)
NAC Wiring ClassClass A (VL-NCA) & Class B (VL-NCB) [Power limited & Supervised]
NAC Special ApplicationsAuxiliary 24VDC Output [Power limited & Unsupervised]
SLC Rated Voltage35VDC Nominal (24V – 39V)
SLC Maximum Current500mA
SLC Maximum Device Capacity254 Addresses
SLC Maximum Line Resistance50Ω (200mA) / 20Ω (500mA)
SLC Maximum Capacitance100nF
SLC Wiring ClassClass X or Class A [Power limited & Supervised]
Dimensions  (W x H x D)535mm x 385mm x 150mm
Cable Entries38
Operating Temperature0°C (32°F) to 49°C (120°F)
Relative Humidity93% Non-Condensing



Velocity MMP/10 Fire Alarm Panel

Contact Us

Velocity MMP/10 Fire Alarm Panel, Printer & VL-232

Contact Us

Velocity MMP/10 Fire Alarm Panel, Zone LED Expansion

Contact Us

Velocity MMP/10 Fire Alarm Panel, Printer & VL-232, Zone LED Expansion

Contact Us