FyreLine Analogue Nylon LHD Cable

Key Features

UL 521 approved and compliant with the EN54:22 draft standard
Self-restorable analogue type system with optional pre-alarm setting
Cable based sensing allows detection at the point of risk
Low installation, maintenance and repair costs
Reliable solution for hazardous areas

Overview

A Nylon coated cable is the common choice when hazardous hydrocarbons such as fuel oils, diesel, kerosene etc. are present. Nylon cables are coloured black and provide suitable UV protection when used in direct sunlight. Nylon is much tougher than PVC and therefore provides additional mechanical protection.

Sensing Cable Construction

FyreLine Analogue Linear Heat Detection cable is constructed using a pair of copper conductors coated in a temperature sensitive polymer whose resistance changes as a function of temperature. A calibration resistance (white) and average ambient temperature sensor (red) core are also twisted with the two original conductors. A foil shield and protective outer coat is extruded over the twisted core.

Approvals

The FyreLine analogue linear heat detection cables are fully approved by the Underwriters Laboratories (UL) and bears the CE mark to show that they comply with all the applicable Directives including the CPR, EMC and the Low Voltage Directive (LVD).

UL 521
Heat detectors for fire protective signaling systems.

Tech Specs

Outer Jacket	Black Nylon
Overall Diameter	5.50mm ± 0.075mm (0.217” ± 0.003”)
Humidity	0% to 99% RH
RFI Shielding	Twisted and foil shielding to reduce inductance and RF susceptibility
Cores	Calibration Resistance: White Sensor Core: Red Conductor & Specially Doped Polymer Core: Clear Conductor & Specially Doped Polymer Core: Clear
Maximum Continuous Length	500m (1640ft)
Minimum Continuous Length	30.5m (100ft)
Operating Temperature Range	-40ºC to 125ºC
Continuous Ambient Temperature Range	-40ºC to 90ºC