- Address settable from 001 to 254 by a dedicated programmer
- Loop powered and low standby current (3mA)
- Mounts to optional 4-inch square junction box
- Status indicator LED
- Supports Class A and Class B wiring
The Velocity Addressable Zone Module is intended for use as part of an addressable two-wire fire alarm system. It can be connected to conventional detectors and monitors and transmits the status (normal, open, short or alarm) of detectors within the zone to the control panel.
It can be wired for Class A (Style D & E) and Class B (Style B & C) operation and has a built-in short-circuit isolator (SCI). The SCI prevents entire loop failure in the event of a short on the loop.
Velocity Addressable Zone Module has a three-coloured LED to indicate the status of alarm, polling and SCI and can be mounted directly to a 4-inch square electrical box.
All components in the Velocity range are UL certified and comply with the requirements of Underwriters Laboratories (UL) 864 Control Units and Accessories for Fire Alarm Systems 10th Edition.
|SLC Applied Voltage||Rated Range 20 to 38V DC|
|SLC Current Consumption||Standby 2.6mA|
Alarm 35.9mA (max)
|SLC Line Impedance||Up to 50Ω|
|Number of IDC (Initiating Device Circuit)||1 x Class A or 1 x Class B|
|IDC Circuit Rating||12 to 18V DC, 560Ω 32 mA (max)|
|IDC Line Impedance||Up to 50Ω|
|EOL Device||RE-10k (10kΩ, 1/4W), Class B only|
|SCI on Resistance||0.2Ω (max)|
|SCI Fault Detection Threshold||10V (min)|
|SCI Isolation Current||22mA (max)|
|Visual Indicator (Status LED)||Polling LED (GREEN)|
Input LED (RED)
SCI LED (YELLOW)
|Ambient Installation Temperature||0°C to 49°C (32°F to 120°F)|
|Storage Temperature||-20°C to 60°C (-4°F to 140°F)|
|Max Relative Humidity||Up to 93 % RH, non-condensing|
|Environment||Indoor dry use only|
|Max Quantity Per||Loop 127 Units|
|Terminal Screw||AWG 12 to 22|
|Address Setting||VDOT-AD2 Address Programmer|
|Dimensions (H x W x Dmm)||124 x 124 x 34.5mm|