Key Features
- Loop Powered
- Common Sounder Group
- Individual Activation using the Detectors Remote LED Output
- Individual Address via the hand-held programmer
- Low Current Consumption
Overview
The Addressable Sandwich Sounder is an addressable loop powered platform sounder/visual indicator device controlled by the fire alarm control. The sounder has been designed to provide a range of tones with a maximum output of up to 100dB(A) (±2dB). Details of the tones range can be found in the table below.
Audibility Solution
Every smoke or heat detector has the ability to be paired with a sandwich sounder eliminating the replacement and extra installation cost of a sounder base if audibility is an issue.
Compatible Detectors
The unit has been designed to fit between any ProFyre detector base and ProFyre addressable detector.
ProFyre Compatible Addressable Panels
The ProFyre analogue addressable sandwich sounder has been designed to complement the ProFyre A4 and A2 addressable control panels & the ProFyre T8 2-wire system.
Approvals
The ProFyre Analogue Addressable Sandwich Sounder is fully approved by LPCB for safe use and installation in any European Union country and bears the CE mark to show that it complies with all the applicable Directives including the CPR, EMC and the Low Voltage Directive (LVD).
- EN54-3:2001 + A1:2002 + A2:2006
Sounders
Alarm Tones
| BS Fire (Default) | Pattern: Alternating Frequency: 800 & 970 Tone: 1Hz (500ms – 500ms) dB(A): 96 (±2dB) |
| BS Fire | Pattern: Alternating Frequency: 800 & 970 Tone: 2Hz (250ms – 250ms) dB(A): 95 (±2dB) |
| BS Fire | Pattern: Sweep Frequency: 800 & 970 Tone: 1Hz (1 Per Second) dB(A): 98 (±2dB) |
| BS Fire | Pattern: Sweep Frequency: 800 & 970 Tone: 7Hz (7 Per Second) dB(A): 99 (±2dB) |
| BS Fire | Pattern: Sweep Frequency: 800 & 970 Tone: 50Hz (50 Per Second) dB(A): 99 (±2dB) |
| BS Fire | Pattern: Alternating Frequency: 510 & 610 Tone: 1Hz (500ms – 500ms) dB(A): 100 (±2dB) |
| German Fire (NIN 33 404) | Pattern: Sweep (DIN) Frequency: 1200 to 500 Tone: 1Hz dB(A): 99 (±2dB) |
| French Fire (NFS 32-001) | Pattern: Alternating Frequency: 554 & 440 Tone: 100ms – 400ms dB(A): 95 (±2dB) |
| Dutch Fire (NEN 2575) | Pattern: Slow Whoop Frequency: 500 & 1200 Tone: 3.5s Sweep, 0.5s Silence, then repeat dB(A): 98 (±2dB) |
| PFEER Toxic Gas | Pattern: Continuous Frequency: 970 Tone: Steady dB(A): 95 (±2dB) |
| PFEER Alert | Pattern: Intermittent Frequency: 970 Tone: 0.5 Hz (1s On / 1s Off) dB(A): 92 (±2dB) |
Tech Specs
| Operating Voltage (Loop) | 17 to 28Vdc |
| Quiescent Current | 650μA |
| Alarm Current | 5.5mA |
| Alarm Tones | See Tones Table |
| Operating Conditions | Tested to: -10°C to +55°C (14°F to 131°F) Humidity: 0% to 95% RH, non-condensing |
| IP Rating | IP21C |
| Design Environment | Indoor Use Only |
| Weight | 0.16kg |