- Low Profile
- 360 Degree LED Indication
- Lockable to base to stop unauthorised removal
- Remote LED Output
- Addressed with dip switches or a hand-held programmer
The optical smoke detector uses a pulsing IR LED and photo diode to detect IR scatter caused by smoke entering the chamber. The detector is particularly suitable for detecting optically dense smoke, involving materials such as soft furnishings, PVC, plastic, foam and all similar materials which produce small visible particles (0.5 to 10μm).
ProFyre Compatible Addressable Panels
360 Degree Indication
The range has been housed in a stylish and attractive moulding with 360 degree LED indication.
All of the ProFyre range devices can be coupled with a sandwich sounder and therefore fitting of a sounder base is not essential should audibility be an issue.
The ProFyre addressable optical detector is fully approved by LPCB for safe use and installation in any European Union country and bears the CE mark to show that it complies with all the applicable Directives including the CPR, EMC and the Low Voltage Directive (LVD).
- BS EN 54-7:2000 + A1: 2002 + A2:2006
Fire detection and fire alarm systems. Smoke detectors. Point smoke detectors that operate using scattered light, transmitted light or ionization.
|Alarm Condition||2.4% obs/m|
|Operating Voltage||10.50 to 33Vdc|
|Quiescent Current||120μA (Max)|
|Remote Output||20mA @ 24Vdc|
|Operating Conditions||Tested to: -10°C to +50°C (14°F to 122°F)|
Maximum Continuous Temperature: 0°C (32°F)
Humidity: 0% to 95% RH, non-condensing
|Design Environment||Indoor Use Only|