Search

FAAST LT Aspirating Smoke Detector

Search

Key Features

  • Ultrasonic airflow sensing
  • PipeIQ™ LT software provides intuitive design and configuration
  • Easily replaceable and reusable filter
  • Single and dual channel versions
  • IP65 enclosure

This product has been discontinued and has been replaced by the FAAST FLEX Aspirating Smoke Detector. Please contact Eurofyre further information, spare parts, servicing and training.

Overview

FAAST LT aspirating smoke detectors provide a flexible and reliable fire detection solution for even the toughest environments.

These air sampling detectors are suitable for use in a variety of Class C applications where maintenance is difficult, aesthetics need to be preserved or where traditional detection methods may be inappropriate due to harsh environments. FAAST LT detectors are also suitable for smaller, mission critical applications where very early warning Class A or B detection is required.

Designed with the end-user and installer in mind, these detectors combine a number of proven aspirating detection technologies to deliver reliable smoke detection that is easy to install and maintain.

FAAST LT detectors use high sensitivity laser detectors, ultrasonic flow sensors, protected electronics and fully independent chambers to enable the device to reach the highest sensitivity required for Class C applications (up to 2000m2) and Class A applications (up to 150m2).

These standalone detectors are available as single channel or dual channel devices and all of the detectors in the FAAST LT range come with a range of customisable settings to maximise device performance and meet the needs of different applications.

FAAST LT devices include pre-alarm functionality for graduated alarm thresholds. All detectors provide alarm and fault relays with auxiliary events relays, available as an optional extra, that can be set as latched or non-latched. Flow and general fault delays can also be set to accommodate local installation standards or environments. 

Thanks to Pipe-IQ pipe design and configuration software, these detectors are easy to install and commission. Ongoing configuration and system monitoring can also be conducted via USB connection.

Approvals

Tech Specs

Dimensions (W x H x D)356mm x 403mm x 135mm
Cable Access3 x M20 gland holes pre-drilled on top and bottom of the FAAST LT-200 unit.Wire Gauge 0.5mm2 to 2mm2 max.
Maximum Single Pipe Length100m
Maximum Total Branched Pipe Length200m (per channel)
Maximum Air Inlet Holes20 (per channel)
Outside Pipe Diameter25mm or 27mm
Internal Pipe Diameter15-21mm
Sensitivity0.07 – 0.66 % obs/m (Alarm Level 1-5)
RelaysPer Channel:
1 Alarm
1 Pre-Alarm
1 Fault
Sounder Outputs1 per channel
Sound PerformanceAs low as 26db(A)
Event Log2,244 Events
InterfacesTerminal blocks: power supply, relays, sounder outputs, external input; USB port; Buttons (Test, Reset, Disable)
Power supply and relays connections2mm2 max
USBStandard USB cable for Type B USB connection
Shipping Weight6.5 kg (dual channel)
Flow Monitoring and ReportingHigh and low according to EN 54-20
FiltrationReplaceable filter
Fan Control10 programmable speeds
Smoke Sensor(s)High sensitivity LED Detection Chamber
External Supply Voltage18.5-31.5 V
Remote Reset Time2s
Power Reset0.5s
Operating Current1 Channel Device: 170mA @ 24 VDC (excluding sounders)
2 Channel Device: 270mA @ 24 VDC (excluding sounders)
Max Alarm Current1 Channel Device: 360mA @ 24 VDC (excluding sounders)
2 Channel Device: 570mA @ 24 VDC (excluding sounders)
Relay Contact Ratings2.0 A @ 30 VDC, 0.5 A @ 30 VAC
Operating Temperature-10°C to 55°C
Humidity Range10% to 93% (non condensing)
IP Rating65
Coverage AreaUp to 2000m2 according to national design regulations

Downloads

Buy

Eurofyre is an authorised distributor of Honeywell and has been a major technical wholesaler of Xtralis products since 2007. We offer expert advice and supply all aspects of VESDA, FAAST and ICAM aspirating smoke detection systems including pipework calculations, demonstration/training and excellent after-sale support.

Contact us to receive competitive trade discounts or apply online for a credit account.

This product has been discontinued and has been replaced by the FAAST FLEX Aspirating Smoke Detector. Please contact Eurofyre further information, spare parts, servicing and training.